Mechanical stimulations have a biological effect on the skin as a whole and these effects depend heavily on the frequency of the stimulation. The thermal-vibrating massage also improves circulation, makes skin more elastic and minimises scars and wrinkles. Skin prefers a frequency of 75 Hz, which has been identified as the optimal frequency, generating 9000 micro-massages per minute. This device, designed to meet this performance requirement, uses thermal vibration technology combined with a pre-warming and a post-cooling system that helps your skin to react efficiently when using our creams and serums. Studies shows that when the temperature of the skin reaches 43C° / 109.4F° it can help produce HSP proteins, repair skin cells, strengthen the skin’s elasticity and prevent the formation of wrinkles. While cooling can shrink pores, locking moisture deep into the skin.
How to operate: Ensure that you have recharged the device for approx. 8 hours before use. To charge the device, use the USB charging base.
Phase 1 – Thoroughly cleanse and dry face, neck and décolleté. Put a small amount of R5 serum onto the conductor (fig.1) in order to facilitate the movement of the device on your face during the skin pre-warming phase. N.B.: All FRAME® serums and creams use an airless dispenser which provides the correct amount of product for a single use. To dispense the R5 serum simply twist the top of the tube: the movement will push the nozzle and button out. A light push of the button will dispense the correct amount of product.
Phase 2 – Press the on button for 3 seconds (fig.2). You will hear a beep and the warming function light will come on (fig.3) This means that the device is on and therefore you can start to gently pre-warm your face, forehead, neck and décolleté for about a minute. Remember to remove glasses when using the device and to never use it on damaged skin. Do not massage the same area for too long.
Phase 3 – Now your pores are temporarily open and your skin is ready for treatment to begin. Apply a dose of R5 serum to your face, or more if you intend to extend treatment to your neck and décolleté, and press the on button again for a second (fig.4). The “thermal vibration” function light (fig.5) will come on, the device will start alternating vibration and you will hear another beep. Now you can start to gently massage your face, neck and décolleté for another minute, applying light pressure and concentrating on areas with wrinkles. Keep your eyes closed while massaging around the eye contour area.
Phase 4 – Press the on button again for a second (fig.6). The cooling function light (fig.7) will come on and you will hear a beep. The device stops alternating thermal vibration and starts to cool down, lowering the temperature to 6C°. You will feel a very pleasant sensation: your skin will naturally react to the cold by closing its pores and all the active ingredients from the serum will be retained deep inside the skin, where they will gradually start to perform their function. Continue massaging your face for another minute.
Phase 5 – Press the on button again (fig.8). The cooling function light (fig.9) and the thermal-vibration function light (fig.10) will come on. The cooling function will continue to work and the thermal vibration function will kick back in. Continue massaging until you hear a beep (2 minutes). The device will turn off automatically. The session is over. Gently tap your face with your fingertips to help absorb any excess serum.
N.B.: Every selected function works for two minutes. If you exceed this time, the device will automatically turn off. If you exceed the two minutes by mistake and the device turns OFF, simply start from the beginning and repeat the steps. Gently tap your face with your fingertips to help absorb any excess serum/cream.
- Size: 6×5.1×20.6cm (including charging base)
- Weight: 175g
- Material: ABS
- Vibration frequency: 9000rpm±10
- Temperature range: 6C° / 42.8F° to 43C° / 109.4F°
- Working time: 5 minutes/time
- Automatic safety shutdown after 2 minutes
- Rechargeable: charging base via USB.
- Charging Time: 8 hours full charging.
- When the charging level is 0-30%, the first light flickers and comes on upon reaching 30%.
- When the charging level is 31-60%, the second light flickers and comes on upon reaching 60%.
- When the charging level is 61-100%, the third flickers and comes on upon reaching full charge.
- The relative light will flicker when battery capacity drops to remind you to charge the device.
- When it runs out of battery, all lights will flicker and the device will soon power-off automatically.
Warnings: This device is not waterproof. To clean it, simply use a soft, damp cloth or cotton wool. Do not dismantle or modify the device as this could cause product damage and circuit failure. Please refrain from using the product if you have oversensitive skin, are allergic to metals or have any pre-existing skin conditions. Stop using the device if you feel any discomfort or suffer from abnormal skin problems after using the product. This product is not designed to be used to diagnose, treat, cure or prevent any disease or health condition and is to be used by healthy adults only, over the age of 18. We do not recommend that you use this product if you are pregnant or breastfeeding without first consulting your doctor. Frame Cosmetics assumes no liability for inaccuracies or misstatements about products.
Limited Warranty: Thank you for your interest in FRAME® products. This limited warranty applies to all physical goods purchased from Framecosmetics.com. This limited warranty covers any defects in materials or workmanship arising under normal use during the warranty period. During the warranty period, FRAME® will repair or replace, at no charge, products or parts of a product that prove defective because of improper materials or workmanship, arising under normal use and maintenance. The warranty period for the goods purchased from framecosmetics.com is 30 working days from the date of purchase for cosmetics, nutriceuticals, supplements, herbal infusions and devices. This limited warranty does not cover any problem that is caused by inappropriate use, conditions, malfunctions or damage not resulting from defects in materials or workmanship. To obtain warranty service, please contact our customer service to determine the problem and the most appropriate solution.